VTEM skitter

EQUIPMENT

OUR COMPANY IS THE MANUFACTURER OF A COMPREHENSIVE MONITORING AND DIAGNOSTICS SYSTEM КD2210 FOR EVALUATION OF THE TECHNICAL CONDITION OF PUMP AND COMPRESSOR EQUIPMENT

Metal hose

metallorukavMetal hose with 2S-shape lock, round, springy, high flexible, non-hermetic. The hose is mostly applied for mechanical protection of electric wiring (cables), tubes etc..

The metal hose consists of a protective jacket made by squeezing between rolls.

The jacket is a twisted tube made of a metal band which throughout the manufacture process is being profiled and spirally twisted in a flexible pipe. Connection and sealing between the spiral turns is achieved due to 2S-shape lock (see the picture of 2S-shape lock below). The material for the jacket is stainless band 0,3х8,0, 12Х18Н10Т, GOST 4986-79. 

 

Specification

Construction: rolled round metal hose, with S-shape lock between the turns.

Features: high flexibility (elastic hose), tolerance towards twisting, tearing, squeezing, excessive bend. 

Profilezamok

Dimensions:

Code (nominal diameter, mm) Inside diameter, mm Outer diameter, mm Allowable deviation of diameters, mm Minimal bend radius, mm Hose weight in squeezed state, g/lin m  Hose weight in extended state, g/lin m
8 8,2 11,3  ±0,3 32 213 149
9* 9,3 12,3  ±0,3 34 234 164
10 10,3  13,3   ±0,3 36 256 179
11* 11,3  14,3  ±0,3 39 277 193
12 12,4  15,4  ±0,3 41 298 208
13* 13,4 16,4  ±0,3 43 319 222
14* 14,4 17,4  ±0,3 46 340 237

 * custom order 

 

Since 2014 our company has completed the full cycle of stainless rolled metal hoses manufacture. The company owns machines for an automatic metal hose manufacture.

stanok1   stanok2