VTEM skitter

EXPERIENCE OF WORK AT VARIOUS SITES

OUR WORKING EXPERIENCE GIVES US A POSSIBILITY TO OFFER THE BEST SOLUTION, CORRESPONDING TO ALL THE WISHES AND DEMANDS OF THE CUSTOMER
VTEM skitter

SAFETY IS OUR GOAL!

SINCE 2001 OUR SPECIALISTS HAVE ACCUMULATED A WIDE RANGE OF SERVICES ON SUPPLY AND INSTALLATION OF DEVICES AND MONITORING SYSTEMS OF ROTARY EQUIPMENT
VTEM skitter

PORTABLE DEVICES FOR YOUR COMFORT

YOU CAN PURCHASE FROM OUR COMPANY THE MOST CONTEMPORARY PORTABLE DEVICES

Products

 We offer...

 

Vibration transducer KD6407   Vibration transducer KD612   Measuring channel КD8700
KD6407-29-08-2017-250     on-KD612-24-12-15     on-KD8700-24-12-15
Vibration speed measuring range:
1–12,7; 1–25,4; 1–50,8; 1–76,2 mm/s
Frequency range: 3-1000 Hz
EX-rating - 0ExiaIICT4X
IP - IP67
Temperature range: -40 to +120 0С
Read more...
  Vibration acceleration measuring range:
490 mm/s2
Frequency range: 0,5 Hz... 10 kHz
EX-rating - 0ExiaIICT4X
IP - IP68
Temperature range: -54 to +121 0С
Read more...
  Vibration acceleration measuring:
range - 50g
shock pulses dBc, dBm - 0-100dB
temperature: -40 to +120 0С
Frequency range: 3 to 20000 Hz
EX-rating - 0ExiaIICT4X
IP - IP67
Temperature range: -56 to +125 0С
Read more...

 
 
     Measuring and computing complex SANPO for monitoring, diagnostics and emergency shut-down of dynamic equipment
SANPO-19-09-16  

Measuring and computing complex SANPO for monitoring, diagnostics and emergency shut down of dynamic equipment is a unique design of “Komdiagnostika” which meets the requirements of API670 standard (American Petroleum Institute, Equipment protection systems).
The complex has block-modular structure “Euromechanics” with modular data acquisition system rack as its basic element. Depending on the needed number of modules there are two modifications of racks -  16-slot (number of measuring modules is from 1 to 13) and 8-slot (number of measuring modules is from 1 to 5). 
Read more...


SP/P – Power supply module   SP/A – Interface module   SP/S – Condition module
SP-P   SP-A   SP-P
SP/P power supply module provides control and redundancy of SANPO supply circuits.
To achieve a high redundancy level, it is possible to connect two SP/P modules to SP/RACK crate, and one or two independent external power supplies «+24V» can be connected to SP/P module..
Read more...
  SP/A Interface module is designed for initial configuration of measuring and computing complex, its diagnostics and creation of interface with upper level of vibration diagnostics system via two Ethernet.
Read more...
  SP/S module is designed for analysis of the measuring modules OK signals, for control of «FAULT» relay which tells about measuring and computing complex fault, and for provision of discrete outputs for activation of such functions as alarm clearing, alarm bypass, special alarm bypass, multiplication of setpoints.
Read more...

 
 
SP/V4 - Vibration module   SP/T6 - Temperature module   SP/IO8 - Comprehensive module
SP-V4   SP-T6   SP-IO8
Vibration protection and vibration diagnostics SP/V4 module provides voltage or current measurement from the sensors in four measuring channels as well as has current outputs of slowly varying 4-20 mА signals and buffer analog outputs for control.   Four relays (RELAY) of SP/V4 module are programmed for special alarm conditions for one or several channels.
Read more...
  Temperature control module SP/T6 is a 6-channel module which supports inputs for connection of thermocouples and resistant thermometers as well as 6 current outputs of slowly varying 4-20mA signal value DA-converter.
Four relay (RELAY) SP/T6 modules are programmed for special alarm setpoints for one or several channels.
Read more...
  The module has 8 comprehensive channels for analog input of unified voltage and current signals and 8 channels for analog output of current signals. Comprehensive SP/IO8 module can be applied for extending the number of channels of SP/V4 and SP/T6 modules by including more than one module into one protection contour.
Read more...

 
 
     Measuring unit KDR
on-KDR   The unit is designed to measure r.m.s. value of voltage and alternative current, voltage and direct current of positive and negative polarity, as well as to form various electric signals in data acquisition and control high-performance systems.
Main KDR modules:
   - module-controller KDC032;
   - measuring module KDM27;
   - measuring module KDM24;
   - measuring module KDM25;
   - control module KDM42.
Read more...

Measuring module KDM24   Measuring module KDM25    Measuring module KDM27
on-KDM24   on-KDM25   on-KDM27
The module is designed to measure output voltage of the external source or of ICP-sensor in one or several measuring channels. Maximum number of measuring channels is four.
Read more... 
  The module is designed to measure output voltage of ICP-sensor in one or several measuring channels. Maximum number of measuring channels is eight.
Read more...
  The module is designed to measure direct current in several measuring channels – from one to sixteen? Depending on the number of installed KDS27I20 transducers (up to eight), each of the transducers is, in its turn. a two-channel direct current measuring device.
Read more...

 
 
     Vibration measuring device VIB-8
vib8  

VIB-8 devices are designed to measure and transduce AC voltage output signals from the primary vibration transducers (vibration speed and vibration acceleration).

The devices are applied for control and balancing of the mechanisms in oil, gas, electrotechnical and other industries which use rotary units (gas-, steam- and hydro turbines, compressors, pumps, electric motors etc.).
Read more...


     Metal hoses
metallorukav  

Metal hose with 2S-shape lock, round, springy, high flexible, non-hermetic. The hose is mostly applied for mechanical protection of electric wiring (cables), tubes etc.

Specification:
Construction: rolled round metal hose, with S-shape lock between the turns.
Features: high flexibility (elastic hose), tolerance towards twisting, tearing, squeezing, excessive bend.
Profile: zamok
Dimensions: 8, 9*, 10, 11*, 12, 13*, 14* (* -at custom order).
Read more...


Calibration of measuring devices
on-stend2
"Komdiagnostika" LLC is accredited to provide test and calibration services of vibroacoustic measuring devices (vibration meters and vibration transducers).
Read more...

 


 The way we work...

 

zajavka strelka dogovor strelka oplata strelka dostavka
We get your request for equipment or services. At this stage, all technical issues are being settled.   We conclude equipment supply contract or service contract. At this stage, we provide the cost of equipment or services.   You proceed with the payment.   We supply the equipment (provide services on test or calibration of measuring devices).

  


 How you can contact us...

 

 "Komdiagnostika" (Moscow) 

address  73, Vera Voloshyna st., Mytishchi, Moscow region, The Russian Federation, 141014 
Settings-Phone-icon  +7 (495) 926-95-31
mail  This email address is being protected from spambots. You need JavaScript enabled to view it.
lico  General Director – Anton Melikhov